Journal Description
C — Journal of Carbon Research
C
— Journal of Carbon Research is an international, scientific, peer-reviewed, open access journal on carbon research, published quarterly online by MDPI. The Spanish Carbon Group (GEC) is affiliated with C — Journal of Carbon Research and its members receive discounts on article processing charges.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High Visibility: indexed within ESCI (Web of Science), Scopus, CAPlus / SciFinder, and other databases.
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 23.8 days after submission; acceptance to publication is undertaken in 4.7 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
Impact Factor:
4.1 (2022);
5-Year Impact Factor:
4.5 (2022)
Latest Articles
Tuning the Dynamic Thermal Parameters of Nanocarbon Ionanofluids: A Photopyroelectric Study
C 2024, 10(2), 40; https://doi.org/10.3390/c10020040 - 26 Apr 2024
Abstract
The present work delineates the tailoring of the thermal effusivity and diffusivity of the novel class of heat transfer fluids—ionanofluids—by the incorporation of nanocarbons like diesel soot (DS), camphor soot (CS), carbon nanotubes (CN), and graphene (GR). When the thermal diffusivity delivers information
[...] Read more.
The present work delineates the tailoring of the thermal effusivity and diffusivity of the novel class of heat transfer fluids—ionanofluids—by the incorporation of nanocarbons like diesel soot (DS), camphor soot (CS), carbon nanotubes (CN), and graphene (GR). When the thermal diffusivity delivers information on the thermal energy propagation, the thermal effusivity concerns the energy exchange at the interface, enabling energy-efficient thermal system design. The nanocarbons are subjected to morphological characterisation by field emission scanning electron microscopy. Fourier-transform infrared and Raman spectroscopic analyses confirm functional groups and vibrational bands. The microcrystalline size and graphiticity are also understood from the Raman spectrum. Ionanofluids prepared by dispersing nanocarbons into an ionic liquid base 1-Butyl-3-methylimidazolium methyl sulfate (BMMS) are analysed by nondestructive photopyroelectric calorimetry (PPE). The PPE analysis of ionanofluids demonstrates that nanocarbons influence thermal parameters in the base fluid, with soot ionanofluids exhibiting increased thermal effusivity and diffusivity due to their various carbon allotropic composition. This study underscores the importance of selecting the appropriate carbon allotrope for tailoring ionanofluids’ thermal properties, providing insights into manipulating these properties for enhanced performance across various industrial applications.
Full article
(This article belongs to the Section Carbon Materials and Carbon Allotropes)
Open AccessArticle
Low-Temperature Deposition of Diamond Films by MPCVD with Graphite Paste Additive
by
Stephen Yang-En Guu, Fu-Cheng Lin, Yu-Sen Chien, Alen Jhang and Yon-Hua Tzeng
C 2024, 10(2), 39; https://doi.org/10.3390/c10020039 - 16 Apr 2024
Abstract
Modern integrated circuits (ICs) take advantage of three-dimensional (3D) nanostructures in devices and interconnects to achieve high-speed and ultra-low-power performance. The choice of electrical insulation materials with excellent dielectric strength, electrical resistivity, strong mechanical strength, and high thermal conductivity becomes critical. Diamond possesses
[...] Read more.
Modern integrated circuits (ICs) take advantage of three-dimensional (3D) nanostructures in devices and interconnects to achieve high-speed and ultra-low-power performance. The choice of electrical insulation materials with excellent dielectric strength, electrical resistivity, strong mechanical strength, and high thermal conductivity becomes critical. Diamond possesses these properties and is recently recognized as a promising dielectric material for the fabrication of advanced ICs, which are sensitive to detrimental high-temperature processes. Therefore, a high-rate low-temperature deposition technique for large-grain, high-quality diamond films of the thickness of a few tens to a few hundred nanometers is desirable. The diamond growth rate by microwave plasma chemical vapor deposition (MPCVD) decreases rapidly with lowering substrate temperature. In addition, the thermal conductivity of non-diamond carbon is much lower than that of diamond. Furthermore, a small-grain diamond film suffers from poor thermal conductivity due to frequent phonon scattering at grain boundaries. This paper reports a novel MPCVD process aiming at high growth rate, large grain size, and high sp3/sp2 ratio for diamond films deposited on silicon. Graphite paste containing nanoscale graphite and oxy-hydrocarbon binder and solvent vaporizes and mixes with gas feeds of hydrogen, methane, and carbon dioxide to form plasma. Rapid diamond growth of diamond seeds at 450 °C by the plasma results in large-grained diamond films on silicon at a high deposition rate of 200 nm/h.
Full article
(This article belongs to the Collection Nanocarbon-Based Composites and Their Thermal, Electrical, and Mechanical Properties)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Observation of Structural Changes during Oxidation of Black and Brown Soot Using Raman Spectroscopy
by
Kim Cuong Le, Saga Bergqvist, Jonatan Henriksson and Per-Erik Bengtsson
C 2024, 10(2), 38; https://doi.org/10.3390/c10020038 - 15 Apr 2024
Abstract
In this study, Raman spectroscopy has been used to evaluate the evolution of the structural modification of soot during oxidation processes at various preset temperatures up to 700 °C. Two types of well-characterized mini-CAST soot, representing black soot and brown soot, were examined.
[...] Read more.
In this study, Raman spectroscopy has been used to evaluate the evolution of the structural modification of soot during oxidation processes at various preset temperatures up to 700 °C. Two types of well-characterized mini-CAST soot, representing black soot and brown soot, were examined. The major difference between the signals from the two types of soot was the higher photoluminescence (PL) signal for brown soot compared with black soot, in addition to some variations in the first-order Raman signatures such as oxygenated groups and their evolutions during thermal oxidation treatment. An interesting observation was the increase in the PL signal for brown soot at increasing temperatures up to 150 °C probably due to the formation of small oxidized polycyclic aromatic hydrocarbon and defects, followed by a decrease in the PL signal until the soot was fully oxidized. We also demonstrated that brown soot is prone to oxidation in ex situ measurements, a factor that should be considered in the Raman analysis of soot.
Full article
(This article belongs to the Section Combustion Emissions)
►▼
Show Figures
Figure 1
Open AccessArticle
Discrete Multiwalled Carbon Nanotubes for Versatile Intracellular Transport of Functional Biomolecular Complexes
by
Kevin Castillo, Aaron Tasset, Milos Marinkovic and Aaron Foote
C 2024, 10(2), 37; https://doi.org/10.3390/c10020037 - 15 Apr 2024
Abstract
In recent years, carbon nanotubes have emerged as a potentially revolutionary material with numerous uses in biomedical applications. Compared to other nanoparticles, discrete multiwalled carbon nanotubes (dMWCNTs) have been shown to exhibit advantageous characteristics such as a high surface area-to-volume ratio, biocompatibility, and
[...] Read more.
In recent years, carbon nanotubes have emerged as a potentially revolutionary material with numerous uses in biomedical applications. Compared to other nanoparticles, discrete multiwalled carbon nanotubes (dMWCNTs) have been shown to exhibit advantageous characteristics such as a high surface area-to-volume ratio, biocompatibility, and unique chemical and physical properties. dMWCNTs can be modified to load various molecules such as proteins and nucleic acids and are capable of crossing the cell membrane, making them attractive delivery vehicles for biomolecules. To investigate this, we measured the impact of dMWCNTs on the number of live and dead cells present during different stages of cell proliferation. Furthermore, we used transmission electron microscopy to produce evidence suggesting that dMWCNTs enter the cytoplasm of mammalian cells via an endocytosis-like process and ultimately escape into the cytoplasm. And lastly, we used live-cell staining, qPCR, and a T-cell activation detection assay to quantify the use of dMWCNTs as a delivery vehicle for a toxic, membrane-impermeable peptide, mRNA, siRNA, and a T-cell activating synthetic dsRNA. We demonstrate successful delivery of each payload into a range of cell types, providing further evidence of dMWCNTs as a versatile delivery platform for biomolecular cargo.
Full article
(This article belongs to the Special Issue Carbon Nanohybrids for Biomedical Applications)
►▼
Show Figures
Graphical abstract
Open AccessArticle
RHEED Study of the Epitaxial Growth of Silicon and Germanium on Highly Oriented Pyrolytic Graphite
by
Kirill A. Lozovoy, Vladimir V. Dirko, Olzhas I. Kukenov, Arseniy S. Sokolov, Konstantin V. Krukovskii, Mikhail S. Snegerev, Alexey V. Borisov, Yury V. Kistenev and Andrey P. Kokhanenko
C 2024, 10(2), 36; https://doi.org/10.3390/c10020036 - 10 Apr 2024
Abstract
Two-dimensional silicon (silicene) and germanium (germanene) have attracted special attention from researchers in recent years. At the same time, highly oriented pyrolytic graphite (HOPG) and graphene are some of the promising substrates for growing silicene and germanene. However, to date, the processes occurring
[...] Read more.
Two-dimensional silicon (silicene) and germanium (germanene) have attracted special attention from researchers in recent years. At the same time, highly oriented pyrolytic graphite (HOPG) and graphene are some of the promising substrates for growing silicene and germanene. However, to date, the processes occurring during the epitaxial growth of silicon and germanium on the surface of such substrates have been poorly studied. In this work, the epitaxial growth of silicon and germanium is studied directly during the process of the molecular beam epitaxy deposition of material onto the HOPG surface by reflection high-energy electron diffraction (RHEED). In addition, the obtained samples are studied by Raman spectroscopy and scanning electron microscopy. A wide range of deposition temperatures from 100 to 800 °C is considered and temperature intervals are determined for various growth modes of silicon and germanium on HOPG. Conditions for amorphous and polycrystalline growth are distinguished. Diffraction spots corresponding to the lattice constants of silicene and germanene are identified that may indicate the presence of areas of graphene-like 2D phases during epitaxial deposition of silicon and germanium onto the surface of highly oriented pyrolytic graphite.
Full article
(This article belongs to the Special Issue Advances in Bilayer Graphene)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Ultrasmall Glucose-Functionalized Au-Carbon Nanohybrids: Exploiting the Warburg Effect to Image Tumors by Multimodal CT/Fluorescence Imaging
by
Roberta Cillari, Sergio Scirè, Gennara Cavallaro and Nicolò Mauro
C 2024, 10(2), 35; https://doi.org/10.3390/c10020035 - 04 Apr 2024
Abstract
Utilizing glucose as a targeting agent represents a pioneering approach in selectively directing nanoparticles towards cancer cells, capitalizing on the pronounced glucose uptake observed in tumors attributable to the Warburg effect. In this study, we have successfully adopted this targeting strategy to facilitate
[...] Read more.
Utilizing glucose as a targeting agent represents a pioneering approach in selectively directing nanoparticles towards cancer cells, capitalizing on the pronounced glucose uptake observed in tumors attributable to the Warburg effect. In this study, we have successfully adopted this targeting strategy to facilitate the specific uptake of advanced nanotools, comprising carbon nanocrystals incorporating gold seeds (AuCDs). Leveraging the advantageous optical and size-related properties of carbon nanodots in conjunction with gold-mediated X-ray attenuation capabilities, these hybrid nanomaterials have been engineered as contrast agents for a bi-modal imaging modality, exploiting the synergistic benefits of fluorescence imaging and X-ray computed tomography. Notably, for the synthesis of AuCDs, we present, for the first time, the incorporation of gold seeds within the molecular precursors of carbon nanodots during their solvothermal synthesis process, showcasing the efficacy of this synthetic pathway in yielding nanoscale carbon structures incorporating bioeliminable gold ultrasmall nanoparticles (d < 5 nm). Subsequently, we employed an azido-alkyne click chemistry reaction to functionalize the nanoparticle surface with 2-deoxy-D-glucose as a targeting moiety. The demonstrated cancer-targeting proficiency, as assessed via fluorescence imaging, renders the proposed nanosystem highly promising for a spectrum of applications in precision anticancer theranostics, encompassing both diagnostic and therapeutic endeavors.
Full article
(This article belongs to the Special Issue Carbon Nanohybrids for Biomedical Applications)
►▼
Show Figures
Figure 1
Open AccessEditorial
Editorial for C—Journal of Carbon Research in 2023
by
Craig E. Banks
C 2024, 10(2), 34; https://doi.org/10.3390/c10020034 - 02 Apr 2024
Abstract
Our journal, C—Journal of Carbon Research (https://www.mdpi.com/journal/carbon), is an international, scientific, peer-reviewed, open access journal on carbon research, published quarterly online by MDPI [...]
Full article
Open AccessArticle
Evaluating the Cytotoxicity of Functionalized MWCNT and Microbial Biofilm Formation on PHBV Composites
by
Thaís Larissa do Amaral Montanheiro, Vanessa Modelski Schatkoski, Denisse Esther Mallaupoma Camarena, Thais Cardoso de Oliveira, Diego Morais da Silva, Mariana Raquel da Cruz Vegian, Luiz Henrique Catalani, Cristiane Yumi Koga-Ito and Gilmar Patrocínio Thim
C 2024, 10(2), 33; https://doi.org/10.3390/c10020033 - 31 Mar 2024
Abstract
This study focuses on the cytotoxic evaluation of functionalized multi-walled carbon nanotubes (MWCNT) and microbial biofilm formation on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanocomposites incorporating MWCNTs functionalized with gamma-aminobutyric acid (GABA) and carboxyl groups. The materials were characterized for cytotoxicity to fibroblasts and antimicrobial
[...] Read more.
This study focuses on the cytotoxic evaluation of functionalized multi-walled carbon nanotubes (MWCNT) and microbial biofilm formation on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanocomposites incorporating MWCNTs functionalized with gamma-aminobutyric acid (GABA) and carboxyl groups. The materials were characterized for cytotoxicity to fibroblasts and antimicrobial effects against Escherichia coli, Staphylococcus aureus and Candida albicans. The functionalization of MWCNTs was performed through oxidation (CNT-Ox) and GABA attachment (CNT-GB). The PHBV/CNT nanocomposites were produced via melt mixing. All MWCNT suspensions showed non-toxic behaviors after 24 h of incubation (viability higher than 70%); however, prolonged incubation and higher concentrations led to increased cytotoxicity. The antibacterial potential of PHBV/CNT nanocomposites against S. aureus showed a reduction in biofilm formation of 64% for PHBV/CNT-GB and 20% for PHBV/CNT-Ox, compared to neat PHBV. Against C. albicans, no reduction was observed. The results indicate promising applications for PHBV/CNT nanocomposites in managing bacterial infections, with GABA-functionalized CNTs showing enhanced performance.
Full article
(This article belongs to the Special Issue Carbon Nanohybrids for Biomedical Applications)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Supercapacitor Performance of MXene-Coated Carbon Nanofiber Electrodes
by
Seon Kyung Kim, Seung Ah Kim, Yoon Soo Han and Kyung-Hye Jung
C 2024, 10(2), 32; https://doi.org/10.3390/c10020032 - 29 Mar 2024
Abstract
MXenes consisting of thin layers of transition metal carbides or nitrides are good candidates for electrode materials due to their excellent electrical conductivity and fast ion transfer. Electrospun carbon nanofibers are highly porous and electrically conductive, making them attractive for electrode materials. In
[...] Read more.
MXenes consisting of thin layers of transition metal carbides or nitrides are good candidates for electrode materials due to their excellent electrical conductivity and fast ion transfer. Electrospun carbon nanofibers are highly porous and electrically conductive, making them attractive for electrode materials. In this study, free-standing electrodes were prepared by the dip-coating of carbon nanofibers (CNFs) in the MXene (Ti3C2) colloidal solution, which was synthesized via the wet-etching of MAX (Ti3AlC2) phase, and their chemical structures were investigated by X-ray diffraction and Fourier transform infrared spectroscopy. In addition, scanning and transmission electron microscopy were used to investigate the morphological and crystallographic features of MXene-coated CNFs. Surface area and pore volumes were investigated by nitrogen adsorption/desorption measurements. Supercapacitor performance was studied by assembling a 3-electrode system with 1M aqueous sodium sulfate solution as an electrolyte. MXene-coated CNFs exhibited a maximum specific capacitance of 514 F/g at 0.5 A/g, with energy and power densities of 71.4 Wh/kg at 0.5 A/g and 2.3 kW/kg at 5 A/g, respectively, which are relevantly higher compared to the pristine CNFs due to the pseudocapacitive behavior of MXenes. They also showed comparable cyclic stability during 5000 cycles with the CNFs. This result indicates that MXene-coated carbon nanofibers can be effective electrode materials for electrochemical energy storage.
Full article
(This article belongs to the Special Issue Nanoporous Carbons for Hydrogen Sorption and Electrochemical Energy Storage)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Plasma-Treated Cobalt-Doped Nanoporous Graphene for Advanced Electrochemical Applications
by
Florian Knabl, Nikolaos Kostoglou, Ram K. Gupta, Afshin Tarat, Steven Hinder, Mark Baker, Claus Rebholz and Christian Mitterer
C 2024, 10(2), 31; https://doi.org/10.3390/c10020031 - 26 Mar 2024
Abstract
Metal–carbon nanocomposites are identified as key contenders for enhancing water splitting through the oxygen evolution reaction and boosting supercapacitor energy storage capacitances. This study utilizes plasma treatment to transform natural graphite into nanoporous few-layer graphene, followed by additional milling and plasma steps to
[...] Read more.
Metal–carbon nanocomposites are identified as key contenders for enhancing water splitting through the oxygen evolution reaction and boosting supercapacitor energy storage capacitances. This study utilizes plasma treatment to transform natural graphite into nanoporous few-layer graphene, followed by additional milling and plasma steps to synthesize a cobalt–graphene nanocomposite. Comprehensive structural characterization was conducted using scanning and transmission electron microscopy, X-ray diffraction, Raman spectroscopy, gas sorption analysis and X-ray photoelectron spectroscopy. Electrochemical evaluations further assessed the materials’ oxygen evolution reaction and supercapacitor performance. Although the specific surface area of the nanoporous carbon decreases from 780 to 480 m2/g in the transition to the resulting nanocomposite, it maintains its nanoporous structure and delivers a competitive electrochemical performance, as evidenced by an overpotential of 290 mV and a Tafel slope of 110 mV/dec. This demonstrates the efficacy of plasma treatment in the surface functionalization of carbon-based materials, highlighting its potential for large-scale chemical-free application due to its environmental friendliness and scalability, paving the way toward future applications.
Full article
(This article belongs to the Special Issue Nanoporous Carbons for Hydrogen Sorption and Electrochemical Energy Storage)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Refining and Validating Thermogravimetric Analysis (TGA) for Robust Characterization and Quality Assurance of Graphene-Related Two-Dimensional Materials (GR2Ms)
by
Dusan Losic, Farzaneh Farivar and Pei Lay Yap
C 2024, 10(2), 30; https://doi.org/10.3390/c10020030 - 26 Mar 2024
Abstract
Graphene-related two-dimensional materials available on the global market are manufactured using various production methods, with significant variations in properties and qualities causing serious concerns for the emerging multi-billion graphene industry. To address the limitations of conventional characterization methods probing the properties of individual
[...] Read more.
Graphene-related two-dimensional materials available on the global market are manufactured using various production methods, with significant variations in properties and qualities causing serious concerns for the emerging multi-billion graphene industry. To address the limitations of conventional characterization methods probing the properties of individual graphene particles which may overlook the presence of non-graphene carbon impurities at a large (bulk) scale, this paper presents the refining thermogravimetric analysis as a complementary method for the reliable chemical characterization and quality control of graphene powders. A systematic parametric investigation of key experimental conditions such as sample mass and loading, heating rate, and gas environment and flow rate is performed to identify optimized settings for reliable thermal gravimetric measurements. These optimized conditions are evaluated through a series of comparative characterizations using industrially produced graphene, graphene oxide, and reduced graphene oxide powders, including their common carbon impurities. The ability of this method to provide both qualitative and quantitative analyses for characterizing graphene-related materials is confirmed. The optimized method is finally validated through an International Laboratory Comparison study and subsequently incorporated into a new standard. This low-cost, industry-affordable, and complementary characterization method is expected to enhance the quality control of manufactured graphene materials and make a valuable contribution to the growing graphene industry.
Full article
(This article belongs to the Section Carbon Materials and Carbon Allotropes)
►▼
Show Figures
Graphical abstract
Open AccessReview
Fused Deposition Modelling of Thermoplastic Polymer Nanocomposites: A Critical Review
by
Taha Sheikh and Kamran Behdinan
C 2024, 10(2), 29; https://doi.org/10.3390/c10020029 - 25 Mar 2024
Abstract
Fused deposition modelling (FDM) has attracted researchers’ interest in myriads of applications. The enhancement of its part using fillers to print nanocomposites is a cutting-edge domain of research. Industrial acceptance is still a challenge, and researchers are investigating different nanofillers and polymer matrix
[...] Read more.
Fused deposition modelling (FDM) has attracted researchers’ interest in myriads of applications. The enhancement of its part using fillers to print nanocomposites is a cutting-edge domain of research. Industrial acceptance is still a challenge, and researchers are investigating different nanofillers and polymer matrix combinations to investigate FDM-printed nanocomposites. Carbon nanotubes, graphene, and cellulose are heavily studied nanofillers because of their astonishing properties, biocompatibility, and ability to tailor the final performance of the FDM-printed nanocomposite part. This work presents a comprehensive review of polymer nanocomposites based on these nanofillers. Important examples, case studies, and results are discussed and compared to elaborate the understanding of the processing of nanocomposites, filaments, printing, and the characterisation of these nanocomposites. A detailed and exhaustive discussion of the prospective computational models, with challenges and a future road map, is provided, enabling the scientific community to understand these nanocomposites and their FDM processing for wider industrial applications and acceptance.
Full article
(This article belongs to the Special Issue Carbon-Based Polymer Composites: Synthesis, Processing, Characterization and Applications)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Laser-Induced Copper/Carbon Nanocomposite from Anodically Electrodeposited Chitosan for H2O2 Sensing
by
Usama Zafar, Prince Kumar Rai, Ankur Gupta, Jan G. Korvink, Vlad Badilita and Monsur Islam
C 2024, 10(2), 28; https://doi.org/10.3390/c10020028 - 24 Mar 2024
Abstract
This work presents anodically electrodeposited copper (Cu)/chitosan gel as a novel precursor for synthesizing a Cu/carbon nanocomposite through laser-induced carbonization. Metal/carbon nanocomposites offering advantageous properties compared to their individual counterparts stand out in various applications, particularly in those involving electrochemical phenomena. However, their
[...] Read more.
This work presents anodically electrodeposited copper (Cu)/chitosan gel as a novel precursor for synthesizing a Cu/carbon nanocomposite through laser-induced carbonization. Metal/carbon nanocomposites offering advantageous properties compared to their individual counterparts stand out in various applications, particularly in those involving electrochemical phenomena. However, their synthesis often suffers from complicated and time-consuming synthesis procedures. Here, we integrate anodic electrodeposition and laser-induced carbonization to yield a rapid, simple, and inexpensive procedure for synthesizing metal/carbon nanocomposite. A precursor composite involving Cu-coordinated chitosan film is achieved through anodic electrodeposition on a copper anode. Irradiation by an infrared laser with optimized parameters results in the thermochemical decomposition of the Cu/chitosan composite, rapidly forming a nanocomposite material featuring highly graphitized and porous carbon materials. Elemental mapping confirms the formation of the nanocomposite, although no crystalline phases of copper are observed during X-ray diffraction. This can be attributed to the rapid nature of the laser-carbonization process. The nanocomposite material is further demonstrated for electrochemical sensing of hydrogen peroxide (H2O2), exhibiting a sensitivity of 2.65 mM−1 for concentrations ranging from 0.01 mM to 0.1 mM H2O2, and 0.01 ± 0.01 mM−1 for concentrations from 0.1 to 10 mM H2O2. These sensitivities are comparable to other non-enzymatic H2O2 biosensors. The finding of this work signifies a rapid and facile method for synthesizing metal/carbon nanocomposites with strong implications for the field of biosensors.
Full article
(This article belongs to the Special Issue Micro/Nanofabrication of Carbon-Based Devices and Their Applications)
►▼
Show Figures
Graphical abstract
Open AccessArticle
A Coordination Polymer Based on Nickel(II)–Cyamelurate: A Robust Catalyst with Highly Dispersed Nickel Sites for Nitrophenol Reduction under Ambient Conditions
by
Taís dos Santos da Cruz, Walker Vinícius Ferreira do Carmo Batista, Eduarda Ferreira de Oliveira, Wanessa Lima de Oliveira, Dilton Martins Pimentel, Gabriel Ali Atta Diab, Ivo Freitas Teixeira, Marcio César Pereira and João Paulo de Mesquita
C 2024, 10(1), 27; https://doi.org/10.3390/c10010027 - 17 Mar 2024
Abstract
Cyamelurate anions obtained from the hydrolysis of polymeric graphitic carbon nitride were used for the preparation of a water-stable and crystalline coordination polymer based on nickel(II)–cyamelurate. The polymer was prepared and applied as a catalyst for the reduction of 4-nitrophenol to 4-aminophenol in
[...] Read more.
Cyamelurate anions obtained from the hydrolysis of polymeric graphitic carbon nitride were used for the preparation of a water-stable and crystalline coordination polymer based on nickel(II)–cyamelurate. The polymer was prepared and applied as a catalyst for the reduction of 4-nitrophenol to 4-aminophenol in the presence of borohydride under ambient conditions. The catalyst was prepared by a simple and environmentally friendly method in an aqueous medium, and it was completely characterized by a variety of techniques, including FTIR, UV–Vis, XRD, TGA, TEM, and STEM. The obtained catalyst was able to catalyze the reaction of 4-nitrophenol to 4-aminophenol with a good kinetic constant. In addition, the catalyst proved to be significantly robust, maintaining a conversion rate greater than 80% after five minutes of reaction for eight consecutive catalytic cycles. In addition, the catalytic activity of the coordination polymer was much higher than that observed for a homogeneous catalyst based on aqueous Ni2+ ions, suggesting the importance of the structure of the coordination sphere formed by the cyamelurate anions. The results presented here can contribute to the application of other coordination polymers anchored with cyamelurate-like ligands and derivatives, as well as to new catalyst designs based on this coordination site formed by oxygen and nitrogen donor atoms.
Full article
(This article belongs to the Special Issue Carbon-Based Polymer Composites: Synthesis, Processing, Characterization and Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
Date Palm Leaflet-Derived Carbon Microspheres Activated Using Phosphoric Acid for Efficient Lead (II) Adsorption
by
Saeed Alhawtali, Mohanad El-Harbawi, Lahssen El Blidi, Maher M. Alrashed, Abdulrahman Alzobidi and Chun-Yang Yin
C 2024, 10(1), 26; https://doi.org/10.3390/c10010026 - 12 Mar 2024
Abstract
The removal of lead metals from wastewater was carried out with carbon microspheres (CMs) prepared from date palm leaflets using a hydrothermal carbonization process (HTC). The prepared CMs were subsequently activated with phosphoric acid using the incipient wetness impregnation method. The prepared sample
[...] Read more.
The removal of lead metals from wastewater was carried out with carbon microspheres (CMs) prepared from date palm leaflets using a hydrothermal carbonization process (HTC). The prepared CMs were subsequently activated with phosphoric acid using the incipient wetness impregnation method. The prepared sample had a low Brunauer–Emmet–Teller (BET) surface area of 2.21 m2·g−1, which increased substantially to 808 m2·g−1 after the activation process. Various characterization techniques, such as scanning electron microscopy, BET analysis, Fourier transform infrared, and elemental analysis (CHNS), were used to evaluate the morphological structure and physico-chemical properties of the CMs before and after activation. The increase in surface area is an indicator of the activation process, which enhances the absorption properties of the material. The results demonstrated that the activated CMs had a notable adsorption capacity, with a maximum adsorption capacity of 136 mg·g−1 for lead (II) ions. This finding suggests that the activated CMs are highly effective in removing lead pollutants from water. This research underscores the promise of utilizing activated carbon materials extracted from palm leaflets as an eco-friendly method with high potential for water purification, specifically in eliminating heavy metal pollutants, particularly lead (II), contributing to sustainability through biomass reuse.
Full article
(This article belongs to the Special Issue High-Performance Carbon Materials and Their Composites)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Let Us Get Regional: Exploring Prospects for Biomass-Based Carbon Dioxide Removal on the Ground
by
Danny Otto and Nils Matzner
C 2024, 10(1), 25; https://doi.org/10.3390/c10010025 - 08 Mar 2024
Abstract
In recent years, research on carbon dioxide removal (CDR) has significantly increased. Numerous studies have analyzed demonstration projects, outlined scenarios, modeled pathways, or focused on CDR’s national or international governance. However, regional case studies investigating the dynamics that may facilitate or impede the
[...] Read more.
In recent years, research on carbon dioxide removal (CDR) has significantly increased. Numerous studies have analyzed demonstration projects, outlined scenarios, modeled pathways, or focused on CDR’s national or international governance. However, regional case studies investigating the dynamics that may facilitate or impede the broader adoption of CDR methods in spatially explicit settings are critically absent. Understanding implementation contexts on the ground is vital, and comparing them across different removal methods is essential for effectively scaling up CDR. This paper aims to address this research gap by comparatively examining the development of biomass-based CDR in three regions of Germany. Taking an exploratory approach, we conducted surveys in these regions to gain insight into stakeholder perceptions of the following six CDR methods: forest management, agriculture and soil carbon, long-lasting building materials, rewetting of peatlands and paludiculture, biochar, and bioenergy with carbon capture and storage. In this article, we present the results of the stakeholder survey, which offers multiple perspectives that can shape future studies of regional implementation and yield policy-relevant guidance. Although our research primarily focuses on the regional level in Germany, it sheds light on various conflicts, uncertainties, and potentials that are likely to be relevant for the rollout of CDR in other countries. By examining these aspects, we contribute to the broader discourse on CDR and its potential implementation.
Full article
(This article belongs to the Section Carbon Cycle, Capture and Storage)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Nonlocal-Strain-Gradient-Based Anisotropic Elastic Shell Model for Vibrational Analysis of Single-Walled Carbon Nanotubes
by
Matteo Strozzi, Isaac E. Elishakoff, Michele Bochicchio, Marco Cocconcelli, Riccardo Rubini and Enrico Radi
C 2024, 10(1), 24; https://doi.org/10.3390/c10010024 - 07 Mar 2024
Abstract
In this study, a new anisotropic elastic shell model with a nonlocal strain gradient is developed to investigate the vibrations of simply supported single-walled carbon nanotubes (SWCNTs). The Sanders–Koiter shell theory is used to obtain strain–displacement relationships. Eringen’s nonlocal elasticity and Mindlin’s strain
[...] Read more.
In this study, a new anisotropic elastic shell model with a nonlocal strain gradient is developed to investigate the vibrations of simply supported single-walled carbon nanotubes (SWCNTs). The Sanders–Koiter shell theory is used to obtain strain–displacement relationships. Eringen’s nonlocal elasticity and Mindlin’s strain gradient theories are adopted to derive the constitutive equations, where the anisotropic elasticity constants are expressed via Chang’s molecular mechanics model. An analytical method is used to solve the equations of motion and to obtain the natural frequencies of SWCNTs. First, the anisotropic elastic shell model without size effects is validated through comparison with the results of molecular dynamics simulations reported in the literature. Then, the effects of the nonlocal and material parameters on the natural frequencies of SWCNTs with different geometries and wavenumbers are analyzed. From the numerical simulations, it is confirmed that the natural frequencies decrease as the nonlocal parameter increases, while they increase as the material parameter increases. As new results, the reduction in natural frequencies with increasing SWCNT radius and the increase in natural frequencies with increasing wavenumber are both amplified as the material parameter increases, while they are both attenuated as the nonlocal parameter increases.
Full article
(This article belongs to the Special Issue Advances in Modelling of Size Effects in Graphene and Carbon Nanotubes)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Application of L-FDM Technology to the Printing of Tablets That Release Active Substances—Preliminary Research
by
Ewa Gabriel, Anna Olejnik, Bogna Sztorch, Miłosz Frydrych, Olga Czerwińska, Robert Pietrzak and Robert E. Przekop
C 2024, 10(1), 23; https://doi.org/10.3390/c10010023 - 06 Mar 2024
Cited by 1
Abstract
The following work presents a method for obtaining PLA composites with activated carbon modified using the liquid for fused deposition modeling (L-FDM) method in which two different compounds, i.e., rhodamine and antipyrine, are introduced. Tablets saturated with substances were obtained. Microscopic tests were
[...] Read more.
The following work presents a method for obtaining PLA composites with activated carbon modified using the liquid for fused deposition modeling (L-FDM) method in which two different compounds, i.e., rhodamine and antipyrine, are introduced. Tablets saturated with substances were obtained. Microscopic tests were carried out, and these confirmed the presence of substances that had been introduced into the polymer structure. UV-Vis spectra and observation of the active substance release process confirmed the relationship between the printing speed and the amounts of the compounds liberated from the tablets. Additionally, the contact angle of the PLA with activated carbon composites was characterized. The hydrophilic nature of the obtained composites favors an increase in the amounts of compounds released during the release process, which is a desirable effect. The surfaces and pores of the obtained materials were also analyzed. The incorporation of activated carbon into PLA results in a significant increase in its surface area. Investigations indicate that a novel approach for introducing chemicals into polymer matrices through the L-FDM method holds promise for the prospective fabrication of tablets capable of a controlled and customized release of substances tailored to individual requirements.
Full article
(This article belongs to the Special Issue Carbon Nanohybrids for Biomedical Applications)
►▼
Show Figures
Graphical abstract
Open AccessReview
Comparison of Modified Peels: Natural Peels or Peels-Based Activated Carbons for the Removal of Several Pollutants Found in Wastewaters
by
Athanasia K. Tolkou, Konstantinos N. Maroulas, Dimitrios Theologis, Ioannis A. Katsoyiannis and George Z. Kyzas
C 2024, 10(1), 22; https://doi.org/10.3390/c10010022 - 03 Mar 2024
Abstract
Wastewater treatment has attracted much attention in recent years as a potential source of water, and there are some concerns about its safety for human use. Eco-friendly and cost-effective adsorbent materials were successfully synthesized from several peels, such as orange, banana, pomegranate, avocado,
[...] Read more.
Wastewater treatment has attracted much attention in recent years as a potential source of water, and there are some concerns about its safety for human use. Eco-friendly and cost-effective adsorbent materials were successfully synthesized from several peels, such as orange, banana, pomegranate, avocado, kiwi, etc., and were used as natural adsorbents or as activated carbons derived from these peels for water and wastewater treatment. In this review, the latest research focusing on the effective modification of these peels for the removal of several pollutants found in wastewaters are summarized and compared, such as pharmaceuticals, dyes, heavy metals, and anions that are released in waste and have a negative impact on human and animal health. In this review, focus is given to activated carbon produced from fruit peels. Moreover, fruit peels as adsorbent materials, without previously being converted to activated carbon, are of limited use in the recent literature.
Full article
(This article belongs to the Special Issue Adsorption on Carbon-Based Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
Analysis of Electromagnetic Shielding Properties of Cement-Based Composites with Biochar and PVC as Fillers
by
Giuseppe Ruscica, Fabio Peinetti, Isabella Natali Sora and Patrizia Savi
C 2024, 10(1), 21; https://doi.org/10.3390/c10010021 - 01 Mar 2024
Abstract
Biochar (bio-charcoal) is a low-cost and eco-friendly material. It can be obtained by thermochemical conversion of different biomass sources, for example, in the total absence of oxygen (pyrolysis) or in oxygen-limited atmosphere (gasification). The porous carbonaceous structure of biochar, resulting from the thermal
[...] Read more.
Biochar (bio-charcoal) is a low-cost and eco-friendly material. It can be obtained by thermochemical conversion of different biomass sources, for example, in the total absence of oxygen (pyrolysis) or in oxygen-limited atmosphere (gasification). The porous carbonaceous structure of biochar, resulting from the thermal treatment, can be exploited in cement-based composite production. By introducing biochar powder or other fillers in the cement paste, it is possible to enhance the shielding properties of the cement paste. The environmental impact of polyvinyl chloride (PVC) can be reduced by reusing it as a filler in cement-based composites. In this work, cement-based composites filled with different percentages of biochar and PVC are fabricated. The scattering parameters of samples with 4mm thickness are measured by mean of a rectangular waveguide in the C-band. The shielding effectiveness of reference samples without any filler and samples with biochar and PVC is analyzed. A combination of 10 wt.% biochar and 6 wt.% PVC provides the best shielding performance (around 16 dB).
Full article
(This article belongs to the Section Carbon Materials and Carbon Allotropes)
►▼
Show Figures
Graphical abstract
Journal Menu
► ▼ Journal Menu-
- C Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Society Collaborations
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Batteries, C, Coatings, Energies, Nanomaterials
Advances in Low-Dimensional Materials (LDMs) for Energy Conversion and Storage
Topic Editors: In Soo Kim, Jin Gu KangDeadline: 15 May 2024
Topic in
C, Energies, Processes, Sustainable Chemistry
Final Sinks of Carbon Capture, Utilization and Storage (CCUS)
Topic Editors: Rafael Santos, Muhammad Salman, Lidija SillerDeadline: 30 July 2024
Topic in
Applied Sciences, C, Electronic Materials, Nanomaterials, Polymers
Application of Graphene-Based Materials, 2nd Volume
Topic Editors: Marcelo Antunes, Chih-Wei ChiuDeadline: 30 October 2024
Conferences
Special Issues
Special Issue in
C
Advances in Bilayer Graphene
Guest Editors: Vardan Apinyan, Tadeusz K. KopećDeadline: 30 April 2024
Special Issue in
C
Advances in Modelling of Size Effects in Graphene and Carbon Nanotubes
Guest Editors: Matteo Strozzi, Ahmet Sinan OktemDeadline: 30 June 2024
Special Issue in
C
Carbon-Based Polymer Composites: Synthesis, Processing, Characterization and Applications
Guest Editors: Chi-Hui Tsou, Patrizia SaviDeadline: 20 July 2024
Special Issue in
C
Adsorption on Carbon-Based Materials
Guest Editors: Jorge Bedia, Carolina BelverDeadline: 31 July 2024
Topical Collections
Topical Collection in
C
Young Carbon Scientists
Collection Editors: Teresa Bandosz, Manuel Fernando Ribeiro Pereira, Peter Harris
Topical Collection in
C
Feature Papers in the Science and Engineering of Carbons
Collection Editors: Craig E. Banks, Jandro Abot
Topical Collection in
C
CO2 Electrochemical Reduction and Conversion
Collection Editors: Małgorzata Zakrzewska, Ana S. Reis-Machado
Topical Collection in
C
Carbon-Derived Materials from Bioresources for Advanced Applications
Collection Editors: Camélia Ghimbeu, Jorge Bedia